 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Sensing distance www..com 2, 5 m 2m 10, 30 cm Supply voltage 12 to 24 VDC Output 80 mA Photoelectric Sensor General-purpose Miniature Sensors Short response time: 3 ms. Easy adjustment of sensitivity and optical axis with STABILITY and LIGHT indicators. Wire-selectable operation mode. Mutual interference protective circuit eliminates cross talk (reflective sensor only). E3S Ordering Information Appearance Horizontal Sensing method Through-beam (separate) 2m 5m Sensing distance NPN output E3S-2E4 E3S-5E4 E3S-5E4S E3S-5E4S1 E3S-R2E4 E3S-DS10E4 E3S-DS30E4 E3S-DS30E4S E3S-DS30E4S1 E3S-2E41 E3S-5E41 E3S-R2E41 E3S-DS10E41 E3S-DS30E41 Model PNP output E3S-2B4 E3S-5B4 E3S-5B4S E3S-R2B4 E3S-DS10B4 E3S-DS30B4 E3S-DS30B4S E3S-2B41 E3S-5B41 E3S-R2B41 E3S-DS10B41 E3S-DS30B41 Retroreflective Diffuse reflective 2m 10 cm 30 cm Vertical Through-beam (separate) Retroreflective Diffuse reflective 2m 5m 2m 10 cm 30 cm 1 E3S E3S Specifications Ratings/Characteristics www..com Item Power supply voltage Current consumption Sensing distance Differential travel Standard objects Control output DC solid-state solid state Load Voltage output Response time (ON, OFF) Operation mode Indicators Enclosure rating Housing material Light source Ambient temperature Item Power supply voltage Current consumption Sensing distance Differential travel Standard objects Control output DC solid-state solid state Load Voltage output Response time (ON, OFF) Operation mode Indicators Enclosure rating Housing material Light source Ambient temperature IEC 144 NEMA IEC 144 NEMA E3S-2jj 50 mA max. 2m --Opaque (7 mm) Opaque (11 mm) Opaque (30 mm) 5m E3S-5jj E3S-R2jj 40 mA max. 0.1 to 2 m (with E39-R1 reflector) 10 cm 20% max. of sensing distance 5 x 5 cm white mat paper E3S-DS10jj 12 VDC -10% to 24 VDC +10%, ripple (p-p): 10% max. Load current: Models with suffix -E4: 80 mA max. Models with suffix -B4: 100 mA max. 2 V max. 3 ms max. Wire-selectable Light indicator (red), stability indicator (green) IP65 1, 2, 12 Plastic Infrared LED Operating: -25 to 55 C E3S-DS30jj 40 mA max. 30 cm 20% max. of sensing distance 10 x 10 cm white mat paper E3S-5j4S(1) 70 mA max. 5m --Opaque (11 mm) 30 cm 20% max. of sensing distance 10 x 10 cm white mat paper E3S-DS30j4S(1) IP67 1, 3, 4X, 6, 12 Metal IP65 1, 2, 12 Plastic 1 ms max. 12 VDC -10% to 24 VDC +10%, ripple (p-p): 10% max. Load current: Models with suffix -E4: 80 mA max. Models with suffix -B4: 100 mA max. 2 V max. 1 ms max. Wire-selectable IP67 1, 3, 4X, 6, 12 Metal Infrared LED Operating: -25 to 55 C 3 ms max. Switch selectable 1 ms max. Light indicator (red), stability indicator (green) 2 E3S E3S Engineering Data Excess Gain Ratio www..com E3S-2E4(1), E3S-5E4(1), E3S-R2E4 E3S-DS10E4(1), E3S-DS30E4(1)(2) E3S-5E4S(1) Indicates the optical reception level according to the sensing distance. There is a reception level margin of five to ten times at the rated sensing distance. Excess gain ratio Excess gain ratio Excess gain ratio E3S-SE4S Operating level Sensing distance (m) E3S-DS30E4S(1) Indicates the optical reception level according to the sensing distance. There is a reception level margin of approximately three times at the rated sensing distance. Sensing distance (m) Sensing distance (m) Excess gain ratio E3S-DS30E4S Operating level Sensing distance (m) Parallel Operating Range E3S-2E4(1) Parallel operating range Y (mm) E3S-2E41 E3S-5E4(41)(42) Parallel operating range Y (mm) E3S-R2E4(1) E3S-2E4 Y X Y X Distance X (cm) Distance X (cm) Parallel operating range Y (mm) Distance X (m) 3 E3S E3S-5E4S(1) Parallel operating range Y (mm) E3S www..com Y Distance X Distance X (cm) Operating Range E3S-DS10E4(1) Optical axis E3S-5E4(41)(42) Optical axis E3S-R2E4(1) Operating position Y (mm) Operating position Y (mm) X X Operating position Y (mm) Standard object (5 x 5 cm) Standard object (5 x 5 cm) X Operating position Standard sensing object (10 x 10 cm) Distance X (cm) Distance X (cm) Distance X (cm) Sensitivity E3S-DS30E4(1)(2), E3S-DS10E4(1) Distance (cm) E3S-DS30E4 (1)(2) d White mat paper Object E3S-DS10E4 (1) d Size of object d (cm) 4 E3S E3S Operation Output Circuits www..com -E4 Type (NPN Output) LightON +V Brown DarkON Blue Output Main circuit Black Black 0V Blue Brown -B4 Type (PNP Output) +V LightON Brown DarkON Blue 2.2 Output Main circuit Black Black 0V Blue Brown -E4S(1) Type Brown Z Black Load (relay) Logic circuit Load (relay) +12 to 24 VDC Main circuit Orange Z Z Blue Self-diagnostic output 0V Z: Zener diode *The color of the code for the self-diagnostic output is orange for models whose model number suffix is S1. 5 E3S Timing Chart -E4 Type (NPN Output) Light E3S -B4 Type (PNP Output) Light-ON Dark-ON Light LIGHT Indicator Output transistor Load (relay, etc.) Incident Interrupted ON OFF Operates Releases ON OFF www..com Incident Interrupted ON OFF ON OFF Operates Releases H L Light-ON Dark-ON LIGHT Indicator Output transistor Load (relay, etc.) Output voltage (logic, etc.) -E4S(1) Type Light-ON Light LIGHT Indicator (red) Output transistor Load (relay, etc.) Output voltage (logic, etc.) Incident Interrupted ON OFF ON OFF Operates Releases H L (Between brown (red) and black (white) lines) (Blue brown (black) and black (white) lines) Dark-ON Dimensions Note: All units are in millimeters unless otherwise indicated. E3S-2E(B)4 4-mm dia., 18/0.12, 3-conductor Standard length: 2 m Weight: approx. 80 g each for emitter and receiver Cord: Sensitivity adjustor (see note 2) Indicator (A) (see note 1) 7 mm dia. lens 6 dia. 12.8 dia. E39-L3 Two, M3 screws Note: 1. A mounting bracket can be attached to side A. 2. Receiver only. E3S-2E(B)41 Cord: 4-mm dia., 18/0.12, 3-conductor Standard length: 2 m Weight: approx. 80 g each for emitter and receiver (A) (see note 1) Sensitivity adjustor (see note 2) Indicator 7 mm dia. lens 6 dia. 12.8 dia. Two, M3 screws Note: 1. A mounting bracket can be attached to side A. 2. Receiver only. 6 E3S E3S-5E(B)4 4-mm dia., 18/0.12, 3-conductor Standard length: 2 m Weight: approx. 155 g www..com each for emitter and receiver (A) (see note 1) Cord: Sensitivity adjustor (see note 2) E3S Indicator 11 mm dia. lens 13.dia. E39-L6 Two, M4 slotted hexagonal bolts Note: 1. A mounting bracket can be attached to side A. 2. Receiver only. E3S-5E(B)41 Cord: 4-mm dia., 18/0.12, 3-conductor Standard length: 2 m Weight: approx. 165 g each for emitter and receiver (A) (see note 1) Indicator 11 mm dia. lens Sensitivity adjustor (see note 2) 13 dia. Two, M4 slotted hexagonal bolts Note: 1. A mounting bracket can be attached to side A. 2. Receiver only. E3S-5E(B)4S(1) Cord: 4.5-mm dia., 18/0.12, 4-conductor Standard length: 2 m Weight: approx. 155 g Indicator 11 mm dia. lens 16 dia. (2.1R) Cord protector Mounting bracket Two mounting holes Two, M4 slotted hexagonal bolts Sensitivity adjustor (receiver only) Mode selector (receiver only) 7 E3S E3S-R2E(B)41 E3S-DS30E(B)41 Cord: 4-mm dia., 18/0.12, 3-conductor www..com 2 m Standard length: Weight: approx. 165 g (A) (see note) Lens (10 x 15) Receiver Sensitivity adjustor E3S Indicator 13 dia. Emitter Two, M4 slotted hexagonal bolts Note: A mounting bracket can be attached to side A. E3S-DS30E(B)4S(1) Cord: 4.5-mm dia., 18/0.12, 4-conductor Standard length: 2 m Weight: approx. 155 g Indicator 11 mm dia. lens 16 dia. Sensitivity adjustor (receiver only) Mode selector (receiver only) Cord protector Mounting bracket Emitter Receiver Two mounting holes Two, M4 slotted hexagonal bolts E3S-R2E42 E3S-DS30E42 4-mm dia., 18/0.12, 3-conductor Standard length: 2 m Weight: approx. 165 g Cord: Lens (10 x 15) Receiver Emitter Indicator Sensitivity adjustor 13 dia. Two, M4 slotted hexagonal bolts Mounting Holes E3S-2LE(B)4, E3S-2DE(B)4 E3S-2LE(B)41, E3S-2DE(B)41 E3S-DS10E(B)4, E3S-DS10E(B)41 Two, M3 holes E3S-5LE(B)4(1), E3S-5DE(B)4(1), E3S-5E4S(1) E3S-DS30E(B)4, E3S-R2E(B)4, E3S-R2E42 E3S-DS30E(B)41, E3S-R2E(B)41 E3S-DS30E42, E3S-DS30E4S(1) Two, M4 holes 20 25.4 8 E3S E3S-DS10E(B)4 4-mm dia., 18/0.12, 3-conductor Standard length: 2 m Weight: approx. 80 g www..com Lens (7 x 13) E3S Cord: Indicator (A) (see note) Sensitivity adjustor 6 dia. 12.8 dia. Emitter Receiver Note: A mounting bracket can be attached to side A. E3S-DS10E(B)41 Cord: 4.5-mm dia., 18/0.12, 3-conductor Standard length: 2 m Weight: approx. 80 g (A) (see note) Sensitivity adjustor Lens (7 x 13) Emitter Receiver 6 dia. 12.8 dia. Indicator Two, M3 Note: A mounting bracket can be attached to side A. E3S-R2E(B)4 E3S-DS30E(B)4 Cord: 4-mm dia., 18/0.12, 3-conductor Standard length: 2 m Weight: approx. 165 g Sensitivity adjustor Indicator (A) (see note) Lens (10 x 15) 13 dia. Emitter Receiver Two, M4 slotted hexagonal bolts Note: A mounting bracket can be attached to side A. Accessories (Order Separately) E39-R1 Retroreflector (Supplied with E3S-R2E(B)4(1)) Two, 3.5 dia. 9 E3S E39-L2 Mounting Bracket Applicable Photoelectric Sensors: E3S-5E41, E3S-R2E41, www..com E3S-DS30E41 E3S Two, M4 slotted hexagonal bolts E39-L4 Mounting Bracket Applicable Photoelectric Sensors: E3S-2E41, E3S-DS10E41 Two, M3 screws E39-G1 Sensitivity Adjuster Knob This accessory is attached to the following models: E3S-5E4(41), E3S-DS30E4(41), E3S-R2E4(41), E3S-LS10XE4, E3S-LS20XE4, E3S-GS1E4, E3S-GS3E4 Note: This adjuster cannot be used with Models E3S-2DE4(41) and E3S-DS10E4(41). 13 dia. 9.3 dia. E39-S1 Slit Applicable Photoelectric Sensors: E3S-5E4, E3S-5E41 (see note 3) E39-S1 Spacer Note: 1. Model E39-S2 can have any of four different dimensions: 11 x 0.5 mm, 11 x 1 mm, 11 x 2 mm, and 11 x 4 mm. 2. Two slits (one for the emitter and the other for the receiver) are used in pairs. 3. Dimensions in parentheses are without the Spacer. Use the Spacer with the E3S-2E4(41) as shown above to prevent the supporter and mounting bracket from touching each other when the optical axis is adjusted. The Spacer is not usually necessary with the E3S-5E4(41) unless the E3S-2E4(41) and E3S-5E4(41) are directly mounted together. 10 E3S E39-S2 Slit Applicable Photoelectric Sensors: E3S-2E4, E3S-2E41 www..com E3S E39-S2 Spacer Note: 1. Model E39-S2 can have any of three different dimensions: 6.5 x 0.5 mm, 6.5 x 1 mm, and 6.5 x 2 mm. 2. Two slits (one for the emitter and the other for the receiver) are used in pairs. Sensing Distance with Slit Photoelectric sensor Slit Width of slit Sensing distance Sensing object E3S-5E4, E3S-5E4j, E3S-5B4, E3S-5B4j E39-S1 0.5 mm 23 cm 0.5 mm 1 mm 58 cm 1 mm 2 mm 1.2 m 2 mm 4 mm 2.5 m 4 mm E3S-2E4, E3S-2E41, E3S-2B4, E3S-2B41 E39-S2 0.5 mm 17 cm 0.5 mm 1 mm 42 cm 1 mm 2 mm 82 cm 2 mm 11 E3S E3S www..com ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. E01-E1-11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Sensing Components & Systems Division 28th Fl., Crystal Tower Bldg. 1-2-27, Shiromi, Chuo-ku, Osaka 540 Japan Phone: 06-949-6012 Fax: 06-949-6021 Printed in Japan 1194-0.5M (1194) a 12 |
Price & Availability of E3S-R1B4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |